Introduction
P P INFLATION TUBULAR FILM MANUFACTURING MACHINE
DESCRIPTION
● Special design of screw, simple, effective, without blocking angle, and with internal water cooling system to enable mixed PVC
raw material melted completely and uniformly, extruding speedily without overheating, high capacity and excellent quality.
● Two stage synchronized take off unit. Take off roller with internal water cooling circulation system, cooling and stablizing the
sheet extruding out from the T-die to enable the sheet stretching propertly, and conveying to the winder smoothly.
● Standardized component parts, easy to be replaced.
| SPECIFICATION | ||||
|---|---|---|---|---|
| MODEL | YF-PP-45 | YF-PP-55 | YF-PP-65 | YF-PP-80 |
| PRODUCT | Polypropylene Tubular Film | |||
| THICKNESS | 0.02~0.06mm | |||
| WIDTH | 100~450mm | 300~600mm | 400~700mm | 500~1000mm |
| OUTPUT | 25~35KG/HR | 30~50KG/HR | 45~65KG/HR | 80~100KG/HR |
| DRIVE MOTOR | 15HP | 25HP | 30HP | 50HP |
OPTIONAL EQUIPMENT
1.AUTOLOADER
2.EMBOSSINGROLL
3.FILMSURFACETREATER
4.DIEROTARYDEVICE
5.BACKTOBACKWINDER
6.AUTOFILMWIDTHCONTROLLER
7.AUTOVOLTAGEREGULATORFORCONTROLPANEL
8.AUTOSCREENCHANGER
9.MAINMOTORBYINVERTORCONTROL
10.AIRBLOWERBYINVERTOR
11.AIRCOMPRESSOR