Introduction
INFLATION TUBULAR FILM MANUFACTURING MACHINE
FOR HDPE / LDPE / LLDPE
DESCRIPTION
● Special design of screw, simple, effective, without blocking angle, and with internal water cooling system to enable mixed PVC
raw material melted completely and uniformly, extruding speedily without overheating, high capacity and excellent quality.
● Two stage synchronized take off unit. Take off roller with internal water cooling circulation system, cooling and stablizing the
sheet extruding out from the T-die to enable the sheet stretching propertly, and conveying to the winder smoothly.
● Standardized component parts, easy to be replaced.
| SPECIFICATION | |||
|---|---|---|---|
| MODEL | 35 YF-MH | 45 YF-MH | 45 YF-MHB |
| MATERIAL | HDPE | LDPE/HDPE/LLDPE | |
| PRODUCT | HDPE TUBULAR FILM | LDPE/HDPE/LLDPETUBULAR FILM | |
| WIDTH(MM) | HDPE: 0.008~0.10MM | HDPE: 0.008~0.10MM/LDPE: 0.01~0.15MM | |
| THICKNESS | 300MM | 500MM | 600MM |
| OUTPUT | HDPE:23KG/HR | HDPE:38KG/HR | HDPE: 45KG/HR LDPE: 41KG/HR |
| DRIVE MOTOR | VS 10HP | VS 15HP | VS 20HP |
OPTIONAL EQUIPMENT
1. AUTO LOADER
2. EMBOSSING ROLL
3. FILM SURFACE TREATER
4. DIE ROTARY DEVICE
5. BACK TO BACK WINDER
6. AUTO FILM WIDTH CONTROLLER
7. AUTO VOLTAGE REGULATOR FOR CONTROL PANEL
8. AUTO SCREEN CHANGER
9. MAIN MOTOR BY INVERTOR CONTROL
10. AIR BLOWER BY INVERTOR
11. AIR COMPRESSOR