Introduction
Compounding & Coloring Pelletizing Machine
WASTE TO PELLETS
DESCRIPTION
● Special design of screw with long ratio, well mixing, stable extruding, high output.
● Screw & barrel are high quality alloy steel, with nitrided, polished, ground and hard chrome plated.
● Two stages gear reducer, with precision ground pinions and water cooling to give expected operation life, transmission smoothly with low noise level.
● Special design of hot die face cutter and cooling water jacket make uniform size pellets by four flexible blades and adjusting the speed of the cutter.
● This pelletizer produces consisitent sized cylindrical or lenticular shape of pellets that are water sprayed and cooled to stop sticking.
● The pellets are seperated from the water by a vibrating, perforated, stainless steel chute.
● Any oversized clumps or lumps will be screened off.
● Standardized component parts, easily to be replaced and maintained.
| SPECIFICATION | |||||
|---|---|---|---|---|---|
| MODEL | YF-TR-85 | YF-TR-100 | YF-TR-120 | YF-TR-150 | YF-TR-180 |
| RESIN TO BE USED | HDPE/LDPE/LLDPE/PP/ABS/PS WASTE MATERIAL OR PELLETS | ||||
| CAPACITY(KG/HR) | 100-150 | 120-220 | 180-300 | 250-400 | 300-500 |
| EXTRUDER TYPE | VENTED TYPE | ||||
| EXTRUDER DRIVE MOTOR | AC 60HP | AC 100HP | AC 125P | AC 150HP | AC 175HP |
OPTIONAL EQUIPMENT
1. PRESSURE GAUGE
2. D.C.MOTOR
3. DRYER
4. FORCE FEEDER
5. DEHUMIDIFIER
6. STORAGE TANK
7. MAGNET
8. METAL DETECTOR